Pro-One Lubricants South Africa

Xtreme Pressure Lubricants


EP-1 Synthetic Industrial Grease

Pumpable Synthetic Ideal for Extreme Temperatures

Heavy duty full synthetic grease designed for extreme temperature conditions or where low and high speed bearings share the same lubricant.  Delivers increased parts life, reduce downtime and outstanding protection in the harshest environments

Pro-One  EP-1 Synthetic Calcium Sulfonate Grease Description

EP-1 Industrial Grease Typical Properties

EP-1 Industrial Grease Typical Properties NSF


  • Pumpable
  • Operates from -60°F (-51.1oC) to 650°F (343.3oC)
  • Extreme pressure protection
  • Heavy load carrying ability
  • Excellent shear stability
  • Highly resistant to water wash
  • Excellent corrosion resistance
  • Cling capability
  • Seal compatibility
  • Low oil bleed characteristics
  • Extreme thermal, oxidative  and mechanical stability


  • Heat & Friction
  • Wear
  • Corrosion
  • Noise
  • Downtime
  • Power consumption


  • Long lubricant dispensing lines
  • Extreme hot or cold conditions Wet and hot end use for roll neck journal bearings
  • Heavily loaded hinge pins, couplings, CV & universal joints
  • Rolling mills, slabbing mills, truck chassis, wheel bearings, general lube points


NLGI Grade 1
Color Brown
Thickener Calcium Complex
Operating temperature range -60oF (-51.1oC) to 650oF (343.3oC)
Kinematic viscosity of base oils @40oC (ASTM 445) 68 cSt (220 SUS)
Penetration @ 25oC (77oF) (ASTM D-217), mm/10
Worked 60 strokes 310-340
Mechanical Stability (ASTM D-217) % change from P60
P100,000 strokes 2.3%
P10,000 strokes with 50% H2O <2.0%
Dropping Point (ASTM D-2265) oF (oC) +554 (+290)
Shell Roll Stability (ASTM D-1831) <4.0%
Oxidation Stability (ASTM D-942) psi drop/500 hours 6.0 lbs
Oxidation Bearing Life (ASTM D-3527) 200 hours
4-Ball Wear Test (ASTM D-2266)
mm scar, 40kg, 1200 RPM, 75oF, 1hr 0.42mm
4-Ball EP test (ASTM D-2596)
LWI, kg >75
Weld Load, kgf 500
Timken OK Load (ASTM D-2509) lbs/kg 60/27
Rust test (ASTM D 1743) Pass
Copper Corrosion test (ASTM D-130) Pass/1b
Salt Fog Spray (ASTM B-117) hours to failure >1000 hours
Water Washout (ASTM D-1264) @ 80oC, % loss <2.2%
Base Oil Characteristics
Viscosity SUS @ 100oF 220
Viscosity SUS @ 210oF 62.4
V.I. Min 136


47014 14 oz/397g cartridge 12
47035 35 lb/15.9 kg pail 1
47120 120 lb/54.4 kg drum 1
47400 400 lb/181.4 kg drum 1